View source for MIW:NaN/V1.25.0

{{clickpic|MIW:MiWorkplace|{{filepath:Back.gif}}}}
= New and Noteworthy in MiWorkplace V1.25.0  =

{| style="width: 100%;"
|- style="vertical-align:top;"
! style="width: 30%; text-align:left;" |[https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=mCzd6k8mQWCzp9lhQSFepw  E014 - Shortcut to increase/decrease font size]
|Quickly increase and decrease the font size of the editor by pressing the <code>CTRL+PLUS</code> and the <code>CTRL+MINUS</code> key combinations.


[[Image:miw_zoominout.gif|border]]


|}

{| style="width: 100%;"
|- style="vertical-align:top;"
! style="width: 30%; text-align:left;" |[https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=G4po9B4vRRqq34XUxkw92g 00065 - Search next and previous (CTRL+K / CTRL+SHIFT+K)]
|Search next and previous shortcuts (CTRL+K and CTRL+SHIFT+K) only worked in combination with the search dialog (CTRL+F). Now they also work standalone.
Just select a piece of text and press CTRL+K or CTRL+SHIFT+K to search the document quickly.


[[Image:miw_quicksearch.gif|border]]


|}

{| style="width: 100%;"
|- style="vertical-align:top;"
! style="width: 30%; text-align:left;" |[https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=nPSdtCs3SLGT2X_gBl-0AQ E026 - Edit library list from connection]
|You can now directly edit the library list by right-clicking on the connection and choosing ''Library List...''


[[Image:miw_editlibl.gif|border]]


|}

{| style="width: 100%;"
|- style="vertical-align:top;"
! style="width: 30%; text-align:left;" |[https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=0ok00NQVS5ap-OcINEczJw 00022 - Integrate MiWorkplace with TD/OMS] 
|TD/OMS now comes with MiWorkplace integration that is on the same level as the integration with RDi for all functions supported by MiWorkplace.

* Open MiWorkplace Editor when editing
* Use MiWorkplace compile results
* Put the item in the build queue on saving
* Open editors in browse mode when not in development
* Reset the library list based on the task at hand
|}


{| style="width: 100%;"
|- style="vertical-align:top;"
! style="width: 30%; text-align:left;" |[https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=EmRQ9JVUQPq7QJ_heTwJMg  E019 - Job list selection of current user and subsystem] 
|The job view filters allow the selection of the current user. This enables you to list jobs that run on behalf of a user. It is also possible to filter on jobs in a specific subsystem.


[[Image:miw_nnjobfltr.png|border]]

|}


{| style="width: 100%;"
|- style="vertical-align:top;"
! style="width: 30%; text-align:left;" |[https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=6XxslBwETGG1Am3RRR2jGQ 00028 - IFS Search] 
|The remote search is now available from the explorer context menu. Also, it enables IFS search by adding two flavors of grep as a search engine. The old-style QSH grep when the open-source tooling has not been installed or the new QOpenSys/pkgs/bin/grep. For more information about the new search capabilities, see the [[MIW:Remote Search|Remote Search]] and the [[MIW:Remote Search Result|Remote Search Result]] chapters. 


[[Image:miw_nnsearch.png|border]]


|}


{| style="width: 100%;"
|- style="vertical-align:top;"
! style="width: 30%; text-align:left;" |[https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=iCL7e89tTTy9MMVFnE3y1A Q004 - MiWorkplace filtering] 
|A flexible filtering system was added, enabling you to define categorized filters for the QSYS and IFS file systems. Filter categories can be toggled on and off together.  
* The filter icon will open the filter management dialog.
* Filters can be imported and exported.
* The relevant help section can be found in the [[MIW:Remote Explorer/Filters|Remote Explorer/Filters]] section.


[[Image:miw_nnfilter.png|border|700px]]


|}


{| style="width: 100%;"
|- style="vertical-align:top;"
! style="width: 30%; text-align:left;" |[https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=fOJ2CagCSJaWpfKqChrV2g  E020 - Job view enhancements] 
|The Job view is enhanced to make it easier to work with jobs:

* Automatically prepare common filters if none are found 
* Show filter criteria in the job filter
* Make filters available across all connections
* Automatically load a filter after it is created
* Add icons to job view context menu
* Refresh will also populate the filters


[[Image:miw_nnjobview.png|border|700px]]

The improved job messages view:

[[Image:miw_nnjobmsgview.png|border|700px]]

|}


{| style="width: 100%;"
|- style="vertical-align:top;"
! style="width: 30%; text-align:left;" |[https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=iAsTmu0VRIGqxvIcanLuLg 00047 - Toggle between IFS and QSYS] 
|A switch to toggle between the IFS and QSys objects has been added to the toolbar. 


[[Image:miw_nntoggleifs.gif|border]]


|}


{| style="width: 100%;"
|- style="vertical-align:top;"
! style="width: 30%; text-align:left;" |[https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=dF7g_kaAQtKb24589qlJCw  E017 - Library List editing] 
|The libraries and library lists widgets in the connection dialog now allow positioning of the libraries in the list using drag and drop.


[[file:miw_newconn_w_3.png|border]]


|}


{| style="width: 100%;"
|- style="vertical-align:top;"
! style="width: 30%; text-align:left;" |[https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=c9YY_Nt4TE6i5WEiIlyeag 00043 - Add multiple libraries  ] 
|You can now add libraries to an active connection. You can also add multiple libraries in one go. 


[[Image:miw_nnaddlibls.gif|border]]


|}


== Other issues/enhancements resolved ==
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=FbdN8OGdTBSxyxijL5wNaA 00006 - Compile result points to source in QTEMP]
: The compile results view would show an error when an SQLRPG precompile fails and the event file entry pointed to a source in QTEMP. QTEMP locations are now mapped back to the original source.   
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=4vYEEqS2Sd-CbzL9rVo52g  E027 - Keep last selected text if nothing was selected before CTRL+F]
: If nothing is selected, the search value was empty after pressing CTRL+F. Instead of making it empty, the previous search value is retained.
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=EOBFfyCqRRupnZ_wLC2bkw  00066 - Find dialog does not know about edit switch]
: If the find/replace panel is open and one switched to another source file, the find did not work on the new source file.
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=nPSdtCs3SLGT2X_gBl-0AQ  E026 - Edit library list from connection] 
: The library list can now be changed on the fly.
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=61qtzqMTScS6DR2Gzx8H8Q 00060 - MiWorkplace cannot handle unreliable connections]
: The UI could behave badly when the connection was dropped. This was changed. MiW will now silently resume the connection (if possible).
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=bQpYMavhQtuGey1yioVaxg 00023 - Source line modification date]
: Source change date in the source line was not preserved. This was fixed.
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=6XxslBwETGG1Am3RRR2jGQ 00028 - Remote Search does not search in IFS] 
: MiWorkplace is now able to search the IFS with grep
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=xNxdoP_qSBqx_JLtTEnALA E023 - Preferences should broadcast an event on save] 
: Plugin developers can now react to events broadcasted by the preferences API
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=4DUItsT4R1GZg_PytJZcdA E022 - Include context-sensitive help]
: Now, you can press F1 anywhere in MiWorkplace to get context-sensitive help. Besides, the manual is now available using the Help menu.
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=Tgz0gUwaT5Gpzjb7qYCetA  E021 - Switch to platform debug]
: We are switching away from LogService logging to platform logging.
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=AdLEKp5lTBqw6u4bsD_vBg 00050 - Dropped Connection opens an empty member]
: When the connection is wonky, the editor might open empty. This is unwanted. We now show an error page with instructions
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=LrxNhDzyRuyDmKi6tF2C3A  00049 - MiWorkplace is not visually updated after an update]
: A mechanism is provided to refresh MiWorkplace automatically after updates were made.
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=Y1gsG-5RQWmeN9nMGIvHYA 00015 - Search and Remote Search randomly disappear.]
: The remote search menu would randomly disappear. This has been fixed.
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=RR1x8rQQTeKtHK-ZY2jaoQ 00029 - MiWorkplace save file option not always available]
: Sometimes, with multiple editors open, the save icon would not be active when an editor became *dirty.
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=w-v_5oBxTZqadPIxmUKlXw 00042 - Notification does not look good in the dark theme]
: Fixed the appearance of the notification window
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=t64awunpT9eGiiDpBNkmdg E010 - Remote search options]
: Remote search now fills in the selected object. Additionally, the search can be started from the context menu.
; [https://helpdesk.remainsoftware.com/gravity/wm/?viewitem=yvVTa1aYQUq3JGqBnx-4Zg 0013 - Search results have misplaced highlights]
: The search line highlight was dark over dark, and the highlight was not positioned correctly. This has been fixed.